OnboardScales.com
Onboard Scales for Trucks and Trailers Galbreath AF Roll-off Onboard Scale System Sales, Service & Parts for:
Dump Truck Scales Logging Truck Scales Holland ILS fifth wheel Scale General Trucking Scales Vulcan Onboard Scales Cardinal Scales
Roll-off Truck Scales Refuse Truck Scales Aggregate Truck Scales Fifth wheel Scales Ez-Scale CAS Scales
Straight Chassis Scales Tipping Refuse Scales Trailer Filling Scales LoadRunner Scales Intercomp Scales
TradeRoute HL Scales Legal for Trade Truck Scales Underbody Truck Scales Air Ride Truck Scales Precision Loads Scales PNT Scales
Deflection Transducers Spreader Scales Forklift Scales Wheel Weigher Scales SI Scales MSI Scales
Refuse Front Fork Scales Concrete Truck Scale SI Tuffer Scales LoadPro Scales Avery-Weigh-Tronix Scales Rice Lake Scales
Replacement Parts Vac Truck Scales Ez-Scale Wheel Loader Scales Logging Scales LoadPro Scales VPG Onboard Scales
Onboard scale systems allow optimum, safe use of a truck’s payload capacity both for maximizing loads and preventing the liabilities of overloading.
USA Sales :1-844-476-2422  
Direct Line:1-330-476-2422  
Quotes@OnboardScales.com
Sales@OnboardScales.com
Celebrating 30 years of Service in the Scale Industry
International Sales: ApexEgroupLLC@gmail.com

Vulcan Refuse Front Loader Truck Scales

 

System Accuracy: Typically
+/- 1% of full scale load or better.
Accurate and reliable payload measurement is an important element of profitability and operating safety in bulk hauling. Whether for municipal, county, state or private operations, Vulcan on-board scale systems allow optimum, safe use of a truck’s payload capacity-both for maximizing loads and preventing the liabilities of overloading.
Vulcan On-Board Scales can be installed on all types of vehicles including, hook lifts, logging trucks, flatbed trailers, chip trailers, front loaders, rear loaders, side loaders, roll-offs, transfer trailers, and many other commercial vehicles requiring scales. Axle group weights, payload weights, gross vehicle weights, and individual pick-up and drop-off weights can be measured using the Vulcan On-Board Scale System.
The Vulcan On-Board Scale System consists of:
• Load Cells or Air Sensors - to sense load or air pressure.
• VSL Vulcoders - to convert the signals from the sensors to weight and communicate with the meter.
• V600 Meter - to display the weights and run the scale system.
The number of VSL Vulcoders needed depends on the number of channels required. The number and type of load cells needed depends on the truck's configuration, such as length, type of suspension, load capacity, etc. Only one V600 Meter is required per truck.
The new Vulcan Single Line (VSL) technology is a revolutionary way that the V600 Meter communicates with each VSL Vulcoder. VSL technology uses a single 2-wire cable to provide the communications between the meter and VSL Vulcoders. The single 2-wire communication cable sends power and set-up data to each VSL Vulcoder while receiving weight data from each VSL Vulcoder.
Important Notice for Front Loader Refuse Truck Operators using load cells to support the body:
To avoid weight measurement errors, the forks must be in the down position and the body lift cylinder pressure must be relieved at the time of measuring for all methods. The pressure relief valve should be engaged during weight measurements. If the truck is not equipped with a pressure relief valve, relieve the pressure manually. In addition, all packing should be done after the weight is recorded.
System Accuracy: Typically +/- 1% of full scale load or better.
Digital Graduations: 10, 20, 50 100 or 200 lbs/kgs
Displays: Total Truck Gross Weight, Net Payload Weight, Steering Axle Weight, Drive Axle Weight.
Note Displays: For other configurations, the channel weight may not be the actual axle group weights because some of the load is being shared by other axles. For short log and refuse trucks, the scales can indicate a weight on an axle group that should not be exceeded in order to keep the truck legal. Load the truck close to the legal maximum according to a certified platform scale. The number displayed on the channel of the meter corresponding to the axle group represents an approximate rear axle group weight and may be used as a reference weight to avoid exceeding the legal limit. This reference weight may be different from the weight shown on the certified platform scale display. Note: Channel "A" does not represent the steering axle weight when fully loaded.

V600 Meter:

  • Display:
    • LED, variable brightness
    • Primary: 6 -.7” high characters
    • Secondary: 16 - .2” high characters
  • Cycle Speed: Variable, 1-9 seconds
  • Size: 8.0”W x 2.6”D x 3.6”H (including mounting bracket)
  • Resolution: 10, 20, 50, 100, or 200 lb or kg increments
  • Voltage required: 10.5 to 29.0 Vdc
  • Current Draw: .7 to 2 amps
  • Protection: Inline, 2 amp fast acting fuses and reverse voltage protection
  • Weight: 27.8 oz (including mounting bracket)

 

VSL Vulcoder:
  • Size: 5.6”W x 4.6”D x 1.5”H
  • 2-Wire Communication Cable:
    • Vulcan designed special cable, urethane jacketed, remains flexible in cold water

  • 4-Wire Sensor Cable:
    • Vulcan designed special shielded cable, polyurethane jacketed, 4 conductor

  • Electronics: Environmentally sealed
  • Connectors: Military grade with dual environmental seals

 

The Vulcan V600 Electronics System combines the most advanced electronics with a user-friendly operation. Works with existing Vulcan load cells and sensors. Ideal for applications requiring more than two channels, set points, recording weight information, interface to on-board printers and computers, or operators who wish to mix tractors and trailers.
  • Easy to Calibrate
  • Uses Vulcan Single Line (VSL) technology
  • Unlimited mixing of trucks and trailers without any adjustment, just plug in and go
  • Handles up to 6 channels
  • Adjustable cycle time (between channels)
  • Brilliant display - large, red LEDs with 4 brightness setting for easy viewing inside/outside the cab
  • 16-character, LED, dot-matrix secondary display for user-friendly meter interface
  • Simple operation with auto-calibrate feature
  • Lockout feature allows full operation of scales while safeguarding against accidental changing of calibration settings
  • Reduced wiring - a single 2 wire cable provides power and communication for all channels
  • Printer interface with date and time
  • Set points with relay drivers to control lights and alarms
  • Interface to on-board computers
  • Configurable for custom applications including weigh-in-motion
  • Can capture up to 2000 events including date, time, and weight for down loading (depending on application)
  • RS-232 port
  • Tare/Zero function
  • Optional Printer
  • V-600 series Spec Sheet
R-506 Manual Front Fork Scale System
The unique Vulcan manual front fork scale system fits all types of front end loaders for refuse applications. The rugged, bolt-on weight sensing forks replace the truck's existing forks. The V600 electronics displays individual bin weights and total net payload weight. It can record up to 1,500 events including: date, time, stop number, pick-up weight and exceptions. Bin weight measurements are initiated by the driver pressing the control button. This system is ideal for audit applications when some or all containers are weighed.
Ship Wt: 500 lbs.  Estimated install time: 16 to 20 HOURS
Installable System: This item is non-refundable.
R-516 Weigh-In-Motion / Static Front Fork Scale System
The unique Vulcan weigh-in-motion / static front fork scale system fits all types of front end loaders for refuse applications. The rugged, bolt-on weight sensing forks replace the truck's existing forks. The V600 electronics displays individual bin weights and total net payload weight. It can record up to 1,500 events including: date, time, stop number, pick-up weight and exceptions. Bin weight measurements are automatically initiated by a proximity switch.
Ship Wt: 500 lbs.  Estimated install time: 16 to 20 HOURS
Installable System: This item is non-refundable.
No more Overweight Fines: The expense of operating overloaded is already prohibitive in many regions and is becoming a serious issue nationwide. Enforcement is increasing and penalties are becoming more costly.

Eliminate Legal Liabilities: The potential costs to a hauler from lawsuits resulting from an accident involving an overloaded truck can be severe.

Ensure Operating Safety: Overloaded trucks have significantly impaired braking distances and cornering abilities, and are more likely to experience premature failures of truck components.

Cut Maintenance Costs: Hauling legal payloads reduces maintenance expense on springs, brakes and tires, and increases the operating lifetime of the truck and body.

Increase Driver Efficiency: Our on-board scales give your drivers the assurance of hauling legal. With scales, drivers finish trips more efficiently and faster with full, legal loads.

Installation times are estimates on first time installations only. Actual installation times are dependent on the skill level of the mechanic and number of mechanics, shop equipment, on the need to possibly relocate other equipment on the truck or trailer.  
Refuse Front Fork Systems Description Ship Wt: Notice Price
Vulcan-R-506

MANUAL FRONT FORK SCALE SYSTEM:
(1) M60 V600 METER
(1) V33 VSL VULCODER - 2 LEAD
(1) A01 CONTROL BUTTON
(2) L38 FRONT FORK LOAD CELLS
(2) Hxx MOUNTING KITS (SPECIFY CROSS TUBE SIZE)
(1) H55 CROSS TUBE CABLE GUARD

500 lbs. Installable System: This item is non-refundable. Call
Vulcan-R-516
- H-56 Cross tube kit for R-516

WEIGH-IN-MOTION / STATIC FRONT FORK SCALE SYSTEM:
(1) M60 V600 METER
(1) V33 VSL VULCODER - 2 LEAD
(1) A04 STATIC CONTROL KIT
(2) L38 FRONT FORK LOAD CELLS
(2) Hxx MOUNTING KITS (SPECIFY CROSS TUBE SIZE)
(1) H55 CROSS TUBE CABLE GUARD

500 lbs. Installable System: This item is non-refundable. Call

 

The DP8340 is a unique 114mm wide dot matrix impact printer used all around the world in multiple of applications. Its specific width allows it to print report, receipt, data or invoices depending of your needs. Its high reliability and its capability to support 12V, make it a perfect product for many mobile applications in vehicles. Its ability to print black and red has been a great benefit by bringing attention to special items on the receipt.

 

Model Description Price
Vulcan-V600 PRINTER Rugged dot matrix impact printer, Single or two ply 3 1/4" roll paper, Optional mounting kit/paper holder,12 Vdc to 24 Vdc, 5 amp minimum, 7.87" D x 7.95" W x 3.86" H,interface cable to V-600 $ 810.00
Vulcan-V600 PRINTER mounting bracket Optional V600 PRINTER mounting kit $ 105.00

 

 

 

 

OnBoardScales.com
Direct Line - 1-330-476-2422
CopyRight © All Rights Reserved
Installable Systems/Parts/Made to Order or Configured to order: Are NON-Refundable
No Customer Data stored on our server.
Prices subject to change without notice
OnboarScales.com Home Page
We record all calls for quality assurance.
Celebrating 30 years of Service in the Scale Industry.
Customers can contact us at emails listed below
Quotes@Onboardscales.com
Backup Account/International: ApexEgroupLLC@gmail.com
 

Receive 3% discount if paid by check or wire transfer